• Ethnic
  Instruments
• 
  Harmonicas
• Independent
  Music
• Music
  Accessories
• Putumayo
  World Music
• 
  Resources
• Sageman
  Drums
• 
  Services

Drum Tightening

The drum is tightened by weaving triangles with the extra rope. The more triangles, the tighter the head becomes.

Step 1 - Uncoil the excess rope after the last triangle. You will be creating new triangles as you work around the drum.

Step 2 - From the last triangle, working in the same direction as previous row of triangles, look at the next 2 separate vertical ropes; verticals -1 & -2. Lay the loose rope over verticals -1 & -2.

Step 3 - Pass the loose end backwards only under vertical-2.

Step 4 - Lay the loose rope over vertical-1 and pass the loose rope back under verticals-1 & -2. If your drum wraps right to left, as in the photos, you should be looking at a Z pattern in the loose rope. If your drum wraps left to right, you should see an S pattern.

Step 5 - The object of this weave is to pull the vertical-1 under the vertical-2. Pull down hard on the rope. This will add a triangle to the ropes.

Repeat this procedure moving in one direction around the drum until the head is tightened. Then tie off your loose rope and secure it around your drum.